Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Timing alignment on B230F 200 1985

posted by  someone claiming to be D McKee on  Mon Jun 3 08:48 CST 2002 [RELATED]

When I pulled the head on my engine, I just loosened the tensioner and left the timing belt hanging there. When I reinstall the head, can I just put the crank on the 0 mark on the timing belt cover, line up the rotor with the TDC mark I made, and line up the camshaft marks and assume I'm timed correctly? I really want to avoid removing the lower cover (i.e., removing the crankshaft pulley) to check the marks there, but I'd like even less to have to pull this thing apart again. Any help would be great. Thanks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Timing alignment on B230F [200][1985]
posted by  someone claiming to be D McKee  on Mon Jun 3 08:48 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.