Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B23 block, B230 head...compatible???? 200 1993

posted by  raidman on  Fri Jun 7 15:42 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Apr 4 22:17 CST 2014
[RELATED]

Hola Bricksters:
I have an 83 B23 rebuilt engine (new rings, bearings,complete head job, etc) sitting at Mom's under plastic wrap.

My 93 245 SW is due for a head/valve job next week.. I suspect the slight oil consumption is being caused by worn valve seals). I'm doing it..that is remove the head,take it to a machine shop, replace. I've done my wife's 89 740 last winter..no problema.
Now for the question...if the block of the 93 requires new rings,etc, could I just put the rebuilt b230 head onto the b23 block and be OK with it in the 93 245??
Are the two components compatible?
Gracias,
el Raidman.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B23 block, B230 head...compatible???? [200][1993]
posted by  raidman  on Fri Jun 7 15:42 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.