Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2006 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Late 960 coil pack design 900 1998

posted by  RK on  Thu Jun 20 05:54 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I inquired about spark plugs few days ago. According to FAQ, to get to the plug I need to remove two 10 mm bolts holding coil pack. When I look under the cover of my block, I see only one bolt (bolt A) that is directly linked to the coil pack with two other 10 mm bolts nearby (B and C) (see picture below). Lance said that his design is different: "Hmmm...interesting. Looks like your coil packs are different than most of ours. My guess is "A" is the only bolt holding them on. On mine, that empty hole in front of "B" has a bolt in it that holds on the coil pack."

Did Volvo change the design in late S90/960 models? (Mine is MY1998) Should I remove only bolt A to get access to the plug? (I don't want to remove anything extra if I don't have to.) Thanks







THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Late 960 coil pack design [900][1998]
posted by  RK  on Thu Jun 20 05:54 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.