Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Ambient temp gauge install 900 1993

posted by  gt6 on  Fri Jun 21 13:33 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Jul 17 19:44 CST 2013
[RELATED]

I've got the little digital ambient temp gauge kit for the 940, ready to install. Apparently, the car is prewired from the dash to the air dam area. I peeked under the car, just behind the air dam on the driver's side, and I've found a 2-lead snap connector zip-tied with extra wire loom and a blank plugged into it. The wire colors appear to be red/green and yellow/green. Is this the correct connection to plug the temp sender into?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Ambient temp gauge install [900][1993]
posted by  gt6  on Fri Jun 21 13:33 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.