Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/1998 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Intake manifold gasket... Tips or tricks???? 200 1984

posted by  Spideyz on  Mon Jun 24 04:59 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I figured out that the rough idling in my 84 240 DL is being caused by a leaky intake manifold gasket. So, now that I know what needs to be done, I've got to do it. Any advice or tricks I should know before getting into this? I just changed out the injector seals during my trouble shooting. My manual makes it sound like all there is to it is to disconnect the fuel line, the bracket that holds the manifold to the block and the manifold bolts. Sounds strait forward, but I could use any advice you guys can give. Thanks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Intake manifold gasket... Tips or tricks???? [200][1984]
posted by  Spideyz  on Mon Jun 24 04:59 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.