Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

More 940 A/C Questions 900

posted by  kokerj on  Fri Jun 28 01:05 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi All,

Trying to diagnose my a/c problems...

Car: 1992 940GL with an A/C leak. I pressurized the system and got the comprssor to turn on (first time in several years). It blew gas out through a leak that appeared to be near the lower right front corner of the condenser. At this location there are what appear to be 3 electrical connectors attached to fittings in the condenser. My question is: for anyone intimately familiar with that area, is there anything that would tend to fail (i.e. a seal on one of those fittings)? Note that the leak does not appear to be in the vicinity of any of the tubing...just those connectors that appear to be attached to machined aluminum.

Many Thanks...

--Jim





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New More 940 A/C Questions [900]
posted by  kokerj  on Fri Jun 28 01:05 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.