Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Pulling apart the driveshaft at the splined section on a 92-960 900

posted by  92-960 on  Tue Jul 16 17:55 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]


Is there a trick to pulling apart the driveshaft at the splined section of a 92-960? I am replacing the hanger bearing and I can’t separate the shafts by hand. I did not unbolt the shaft at the differential hoping I could just pull off the front part.

thanks
92-960





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Pulling apart the driveshaft at the splined section on a 92-960 [900]
posted by  92-960  on Tue Jul 16 17:55 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.