Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2007 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

144 Steering Box 140-160 1970

posted by  kev on  Sun Jul 21 07:34 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Aug 7 11:21 CST 2009
[RELATED]

Hi! Hopefully you're not reading this twice - but 1st seems lost during that storm!!

Basically, changed steering box on my 1970 144 - merrily put 'new' one on, and then discovered the relay arm was similar, but not the same as original (too straight).

Box off, arm off (with difficulty!)did the swap - marked both arms on old and new boxes in relation to body of box when marks aligned on box and lower steering column, and put old arm on 'nwe' box in that position - and back on - but with road wheels straight ahead, marks on box out of centre. So, off again, relay arm off (and even though it had been off not half an hour before, what a job!!)

Box on, arm on loosely, lined up, all off, arm nut torqued up, etc. Guess what? When road wheels straight ahead, marks on box 90 degrees apart.

Am I missing something? I assume the road wheels need to be straight ahead, and box marked aligned - seems so simple - am I missing something?

Assume it's 'critical' that marks on box align with road wheels straight ahead.

Thanks,

Kevin





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 144 Steering Box [140-160][1970]
posted by  kev  on Sun Jul 21 07:34 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.