Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

B23F valve job 200 1984

posted by  kitclay on  Tue Jul 23 12:41 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

So here I am doing a valve job. I buy a gasket kit for the top end of a B23F. The kit covers 3 motors. B21E B230F are the other 2. So I get 4 valve seals with the metal spring for the intake manifolds but also I get 4 fat round seals that also fit the valve stems. Do these go on the exhaust valve stems and if so where? In the center of the spring? Do they belong to a different motor. I saw no o rings on the valves when I took them out.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B23F valve job [200][1984]
posted by  kitclay  on Tue Jul 23 12:41 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.