Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2007 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Metal chips in turbo - methods for removal 700 1987

posted by  matt82dl on  Tue Jul 30 01:43 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 10:46 CST 2014
[RELATED]

While recently changing my exhaust system broke a stud off in the exhaust side of the turbo. I removed the entire manifold/turbo assembly and took it to work and drilled out & re-tapped the hole. Despite taking all the precautions to not get metal chips in the impeller cavity... I did. I have already used a shop vac on the exhaust side and compressed air on the inlet side. What else can I do thouroughly clean to protect the impeller et. al


Thanks,

Matt

--
'82 240 - 144k; '87 760T 133k






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Metal chips in turbo - methods for removal [700][1987]
posted by  matt82dl  on Tue Jul 30 01:43 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.