Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Tailshaft Bushing Time! Anyone use the IPD Tool? 200 1982

posted by  matt82dl on  Tue Aug 6 17:22 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Oct 13 10:46 CST 2014
[RELATED]

I have been trying to track down a hideous driveline humm / growl. tonight I replaced my torque arm bushings, that helped a little bit. But... I definately have at least one bad U-joint - the rearmost one, it has definate play in the needle bearings. In addition, there is considerable play in the tailshaft.


I think I am ready to give this bushing replacement a try. Has anyone had success with the the IPD tool. FAQ reports two failures of the tool during use.

Should I save myself the $40 and just remove the housing?? I'm kinda worried about contaminating the trans. I haave access to a machine shop so bushing removal / installation is not a problem.

Should I spring for the Volvo replacement parts for this job??

Any tips and/or words of encouragement are appreciated.

Matt
--
'82 240 - 144k; '87 760T 133k






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Tailshaft Bushing Time! Anyone use the IPD Tool? [200][1982]
posted by  matt82dl  on Tue Aug 6 17:22 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.