Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

AC Problem 89 240gl with R134a 200 1989

posted by  dave_farmer on  Sun Sep 1 11:55 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun May 6 07:06 CST 2001
[RELATED]

I converted from R12 to R134 a month ago
with 3 cans of R134a.
It was only getting down to 60 degrees F
running full bore on a not so hot day 80.
Lately it is not getting very cold anymore
so I added 1 more 12oz can to it today and
it only puts out 80 degree air. the low side
pressure is about 70 now was 40 and the high side
pressure shows 275 now. In the sight glass there
appears to be lots of bubbles as it looks like foam
running thru the system. Does anyone know what the pressures
should be and what might be my problem. Before the conversion
The air was not working very good then either.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New AC Problem 89 240gl with R134a [200][1989]
posted by  dave_farmer  on Sun Sep 1 11:55 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.