Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

sway bar bushing replacement 200

posted by  someone claiming to be Jeff on  Thu Sep 12 02:11 CST 2002 [RELATED]

In order to replace the sway bar bushings including the link ends do I need to take the pressure off the front end by raising it or putting it on jack stands or can I do this project using ramps to get under the car? Also, any wisdom you might have gained from doing this job in the past would be appreciated






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New sway bar bushing replacement [200]
posted by  someone claiming to be Jeff  on Thu Sep 12 02:11 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.