Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ITS ALIVE!!!! 200

My temp gauge in my 91 245 has been working fine, or so I thought. I decided to do the little hack of removing the temperature compensator board, and jumped the #1 and #3 pins... and now the temp gauge actaully does something. Whe I am in slow moving traffic the gauge goes kinda up a bit... and when I am going at a good rate of speed the thing is a little bit below center. And most of all, if I turn the heat on full and turn the blower on full, the gauge drops pretty good. Overall I recommed everybody does this to there instrument panel, the gauge is soo much quicker to respond. It doesn't have a huge delay, which can be very bad in some cases, where it can almost be too late to "un-*uck" the problem.

kevin
--
1980 244DL, 1982 245GL, 1987 744GLE, 1991 245SE, 1996 855GLT, 2001 V70







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.