Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2006

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

940 Central locking system wiring diagram.

posted by  C on  Sat Sep 21 06:18 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I am stumped with this! The 740 manual (I haven't gotten one for the 940 yet) says that the relay for the central locks (relay board looks exactly the same)is also used for the high beams. The high beams work, but when I pull the relay they don't, so I know I at least have the relay for the high beams. Should I be looking for a differnt relay, maybe someone else. I have been poking wires with a test light and the multi meter and have traced the fault to the relay, I just can't figure out which relay it is! Would the high beams still work and the central locks don't if they share the same relay? Does anyone have a wiring diagram for the central lock system?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 940 Central locking system wiring diagram.
posted by  C  on Sat Sep 21 06:18 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.