Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

toss idle air valve--consequences? 200 1981

Bueno,

Sitting here pondering running 1981 244GL w/ k jet with idle air motor/valve disconnected, out of the picture, run small piece of /hose between in port and out port.

Would base idle be too fast now? Would be permanent idle bypass around throttle valve in this scenario. Any consequences that couldn't be adjusted out? Car has automatic and seems to need boost anyway.

Car can be made to idle at 900 rpm once fully warm, in park/neutral, w/ dysfunctional IAC (stuck closed) mounted, electric connector on. But idle adjust screw is truly "maxed out".

BRICK on accelerator has always worked for me as "hand" throttle but this is girlfriend's kar alas and should be korrekt.

Frank in Ohio







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.