Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/1998 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Cutting out rusted floorpan... 200 1983

posted by  raidman on  Thu Oct 3 15:54 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Apr 4 22:17 CST 2014
[RELATED]

After removing the carpet from the floor behind the driver's seat, I found it was completely rusted out...no wonder the seat rocked back and forth!! Took a coping saw and cut out a square section about 18" by 18"..now will tack weld on a piece of sheet metal to replace the rusted floor. What do I use for sound proofing like the original? I have a can of zinc paint for rustproofing and 2 cans of 3M undercoating. Do I spray the under coating on the inside of the car, under the rug??? What else to use?
Thanks,
el Raidman





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Cutting out rusted floorpan... [200][1983]
posted by  raidman  on Thu Oct 3 15:54 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.