Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Any Engine Bay Wiring Besides Fuel Pump Fuse To Use For Kill Switch? 200 1990

posted by  someone claiming to be McGonegle on  Tue Oct 8 11:19 CST 2002 [RELATED]

The fuel pump fuse (bolted on rim of engine bay about 1' aft of the battery) is 25 Amp. The wiring for this looks to be about a 8 gauge (based on what the AutoZone guy told me). I need to thread 2 wires thru the wiring harness bundle closest to the wiper motor (in front of the glovebox). I don't think 2 8 gauge wires can do it. It was pretty darn tight feeding a coat hanger thru the firewall via that harness!
Are there any other wires, of higher gauge(smaller diameter), that if I connect a switch to will prevent the car from starting?
TIA
Matt






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Any Engine Bay Wiring Besides Fuel Pump Fuse To Use For Kill Switch? [200][1990]
posted by  someone claiming to be McGonegle  on Tue Oct 8 11:19 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.