Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2002 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

head porting 120-130

posted by  mario_e on  Fri Oct 11 15:09 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Sep 17 06:43 CST 2008
[RELATED]

As part of the rebuild I'll be cleaning up a B20F head. This will be used with possibly a mild cam Isky VV61, VV71 with advance key, or just a new factory grind (possibly also advanced). Want the torque curve on the lower end, don't care about 5500+ RPM. Its a city car.

Will be getting a three angle valve grind, considering 37mm exhaust valve.

Anyhow I would like some input as to what to address in porting Volvo heads. As I said I'm not building a fire-breathing 7000RPM racer but want to increase efficiency as much as I can without killing my low end response.

Anyone have experience with this?

Thanks.

Mario E.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New head porting [120-130]
posted by  mario_e  on Fri Oct 11 15:09 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.