Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2008 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How to change the plastic gear shift lever indicator? 900 1995

posted by  someone claiming to be Laozong on  Wed Oct 16 20:44 CST 2002 [RELATED]

940 Non turbo
Year 1995

My gear shift lever indicators (where the P, R, N, D, 1, 2 are) are showing lights through all the numbers except the selected one which is shielded by the white plastics.

I suspect the white plastic could have been torn. I did manage to go as far as to remove the black plastic encasing the shift lever indicator and the handbrake. Beyond this I could not open up the indicators housing because there were no screws either hidden in the brush or at the side as what the green manual says.

How then could I remove the shift lever indicator housing to get a fix on the white plastic that shields off lights from the inside of the gear shift lever?

What does the job entails?

Thanks for the advice in advance

Laozong






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How to change the plastic gear shift lever indicator? [900][1995]
posted by  someone claiming to be Laozong  on Wed Oct 16 20:44 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.