Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Instrument cluster change in progress -- unprepared as usual 200 1983

posted by  someone claiming to be clueless in texas on  Fri Nov 8 11:04 CST 2002 [RELATED]

I don't know how to plug in the tachometer...
My current cluster has the big clock, I bought a used one with a tach.
I don't see any hanging wires to plug into the tach.
Does that mean I need to splice out of the/a harness to get it done?
Which port goes to the speedo and which goes to the odo?
Also I broke the connector that goes to the central most port (speedo or odo, I'm not sure) when I pulled the cluster out it fell apart.

Crikey!!

Have any of you fine gents swapped out a clock for a tach?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Instrument cluster change in progress -- unprepared as usual [200][1983]
posted by  someone claiming to be clueless in texas  on Fri Nov 8 11:04 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.