Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2001 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Need help with brake pedal removal (Swapping in a manual trans) 700

posted by  someone claiming to be 744TGuy on  Sun Nov 10 11:25 CST 2002 [RELATED]

Hello,

I am in the process of converting my '88 744 Turbo from automatic to manual. All of the conversion parts came from an '84 764 Turbo, and I started to tackle installing the clutch and brake pedals today. The problem is that while I have the assembly unbolted from the firewall I can't even begin to imagine how to pull it out. I'm thinking that the one main obstacle I have is the computer that is bolted to the side of the bracket. Can I just unhook the wiring harness from the computer to get it out? I tried to pull it off, but it only comes off halfway. I saw a phillips head screw at the end that wouldn't come off and removed it, but it still will not come off. Also, will I have to pull the steering shaft? It seems like that would be in the way as well.

Thanks,

Matthew






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Need help with brake pedal removal (Swapping in a manual trans) [700]
posted by  someone claiming to be 744TGuy  on Sun Nov 10 11:25 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.