Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rotor Button 200 1985

posted by  stxavier2003 on  Thu Nov 14 11:58 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jun 17 14:01 CST 2007
[RELATED]

I posted a few posts back about motor mounts that I just got from FCP Groton. I also got a new distributor cap and rotor button. The cap is fine and I already put it on. However, the button, although it looks the same, has a smaller cylinder honed out in the back to fit over the shaft in the distributor. I checked the part number with FCP's website and it is right so I got the right part according to the site. It is for a 1985 B230F. There is no vacuum line connected to the distributor but there is a plug with multiple wires coming into it. The only reason I can think this is wrong is that the California spec cars (mine is) had a different distributor for some reason? It is a bosch distributor too with the red cap. Anyone have any ideas? Did bosch just put the wrong part into the box? thanks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rotor Button [200][1985]
posted by  stxavier2003  on Thu Nov 14 11:58 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.