Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2006 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

16 valve mistake, lesson told 700 1989

posted by  runwld2 on  Mon Nov 25 13:37 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Sep 30 13:11 CST 2014
[RELATED]

So my 16v was leaking oil from the head gasket.
I carefully took off the head and replaced it along with other stuff. Leak gone...but-
On the second teat drive, POW! ticking and no go. The belt had jumped.
No wonder after looking under the hood. The bolts holding the idle pulleys to the head had come loose and one had broken on a downshift. The belt jumped a long way!
I'm sure I torqued the bolts in, but maybe not? The book said 18 ftlbs. Is this correct, and next time I'll use some loctite.
Also, the car would start poorly when cold, and not idle. Could this be the timing being off? ( the idle motor was connected )When re-installing the distributor, even though there is a plastic insert in the slot, there is still some play. Any hints on getting the timing right before starting up?
Oh yeah the damage, 16 bent valves, 6 valve guides cracked. OUCH...
--
744-16v,745-16v,242Turbo.245DLT






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 16 valve mistake, lesson told [700][1989]
posted by  runwld2 subscriber  on Mon Nov 25 13:37 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.