Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Can this be done? 700 1988

uid 13809's pic
posted by  Alex Z on  Fri Nov 29 10:21 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 3 04:30 CST 2013
[RELATED]

Would it be possible to get a key cut for the lock currently in a 1988 760 Turbo?

A friend of mine is looking at this car, it's currently without keys... so I got a key from the dealer to the tune of $40. The key works fine in the passenger's door and trunk lock, but not in the ignition or driver's door. So it seems like the ignition and driver's door locks were replaced with ones not matching the VIN.

Obviously it's much easier to pull the door lock cylinder than the ignition lock, so he did that. Could he take the lock cylinder to a locksmith and have a key made that will work in these two locks? Or is the only option to get a set of new locks and chisel out the ignition lock?

- alex

'85 244 Turbo | ~144.8k miles






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Can this be done? [700][1988]
posted by  Alex Z  on Fri Nov 29 10:21 CST 2002 >
  • New Can this be done?
    posted by  someone claiming to be Joe Ward  on Fri Nov 29 15:27 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.