Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2005

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

960 rear seal replacement - anything I should know before doing this?

posted by  JetDriver on  Tue Dec 3 04:50 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jul 25 08:59 CST 2011
[RELATED]

A local garage is going to replace the rear main seal in our 94 965 for 100us and I supply the parts and supervision. The mech said we would just slide the trans back after unbolting everything. I plan on having him disconnect the batt ground before this as we will have to disconnect plugs. The pnp was replaced about 30k miles ago so I'm not concearned with replacing it.

Does this block have a seal housing like the 4 bangers and does it need to come off?

Is the seal inserted to a measured distance or is there a seat. I checked the faq, but nothing on this procedure.

Thanks.
--
92 244 lowered, Bilsteins, IPD sways, Unitek cam/header, TSW Revo 18x8's - 94 965 Niiice MONEY PIT! - 76 Datsun 280Z lowered, modified head, cam, headers, intake







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.