Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2008 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Manifold Geskets again.. Thanks John! 700

posted by  someone claiming to be PaulInTampa on  Thu Dec 5 15:11 CST 2002 [RELATED]

Hey Bricksters,

First and foremost I want to thank John Sargent for the pictures he sent to me.
My next issue is which line is the drain line to the turbo, I undid the line on the top of the turbo it was eithere a 19mm or 18mm bolt(right under is the coolant line the bolt has a round hole in the bottom of it), I am guessing that is the supply line and I shouldnt have done that? I put the car back together because I could not loosen the manifold bracket(anyone have any suggestions)and started her up and had oil leaking out of that bolt area big time.. I am hoping I have lost the O-Ring like most have stated but am not sure if that is even the right bolt that I have taken out.. I am not in dire need of the car at the moment, just would like to get it fixed.. Anyone that can help, post a message or Email me at PM020@aol.com..

Thanks soo much,
Paul






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Manifold Geskets again.. Thanks John! [700]
posted by  someone claiming to be PaulInTampa  on Thu Dec 5 15:11 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.