Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Original Distributor Taken by Thief- Will Replacing It Be More Difficult 200 1987

posted by  Pambill on  Mon Dec 9 11:50 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hello Our 87 240 230F had the distributor stolen. We bought a used distributor at the salvage yard. The volvo manuals give precise instructions to replace the existing distributor by marking before removal. We unfortunately must start without any marks. The pictures in the manuals look different that our distributor. We do not have a diaphram on our distributor. We do have the black connector which comes out the side of the distributor. Looking at the distributor it seems that I would line up the black connector and the rotor when inserting the distributor. The instructions make it sound like the alignment will change when i try to set the distributor into the engine. Also the instructions indicate that there are 2 TDC for #1. How can I get the right TDC. Thanks for any help






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Original Distributor Taken by Thief- Will Replacing It Be More Difficult [200][1987]
posted by  Pambill  on Mon Dec 9 11:50 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.