|
Bricksters:
Just cleaned up 4 CLOGGED injectors from 83 240 that had been sitting for 5 years. Here's the system:
1. old B23 fuel rail to connect injectors,brazed outlet shut
2. brazed an A/C shrader valve to inlet
3. connected R12 A/C hose to inlet
4. used R12 can penetrator to pierce a can of pressurized Champion Fuel System Tune-up fluid..conected this to A/C hose
5. set pressure at 30 lbs
6. used a Noid light tester to run current to injectors
7. tapped injectors with Leatherman several times
8. DANGEROUS AS HELL...liquid all over,but finally all 4 injectors were atomizing the fluid beautifully.
9. Do this outdoors over concrete.
Buena suerte,
el Raidman
|