Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

AMM adjustment: Hooked up the LED, No blink, now what. 700

posted by  pbrown on  Wed Dec 18 00:27 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Okay I know you hook up the LED to a 750 ohm resistor, plug it in the green/white wire on the test plug and hook it to the battery. The LED lights up but won't blink. It just stays lit. Turning the screw counterclockwise has no effect (the base resistance was close to 1 ohm, which I understand is the top of the range for it). Isn't it supposed to flash, and when the on and off duration are about even you've correctly adjusted the AMM?

What gives?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New AMM adjustment: Hooked up the LED, No blink, now what. [700]
posted by  pbrown  on Wed Dec 18 00:27 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.