Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2004 700 INDEX

[<<] [>>]

VIEW

REPLY TO THIS MESSAGE

Replies to this message will be emailed.

SAVE

Building a lower chassis brace for 700/900 cars 700

posted by john sargent on Fri Jan 3 16:03 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS]

[IGNORE ALL POSTS]

last visit: Wed Oct 22 09:07 CST 2014

[RELATED]

My son has built a couple of lower chassis for 700 series cars braces using flat steel. The diagonal braces are made from 1.50" X 3/16" (40" total) flat steel bar, and the connecting bar is made from 1.00 X 1/8" (24" total) flat steel bar. A bench vice was used for the bending, and my drill press for the holes. If you don't have a drill press, a hand drill is certainly adequate for drilling the holes. The holes were drilled to match the available holes in the chassis. The lower chassis brace along with the upper strut tower brace he also made really stiffened up the car, just like the same parts you can buy. Total time to make and install was less than two hours.

THREADED

THREADED EXPANDED

FLAT

PRINT ALL

MESSAGES IN THIS THREAD

Building a lower chassis brace for 700/900 cars [700]
posted by john sargent subscriber on Fri Jan 3 16:03 CST 2003 >

Building a lower chassis brace for 700/900 cars [700]
posted by Aye Roll on Fri Jan 3 17:15 CST 2003 > V
- Building a lower chassis brace for 700/900 cars [700]
  posted by Kane on Fri Jan 3 18:22 CST 2003 > V
- Building a lower chassis brace for 700/900 cars [700]
  posted by john sargent subscriber on Sat Jan 4 06:07 CST 2003 > V

Building a lower chassis brace for 700/900 cars [700]
posted by someone claiming to be bagle on Fri Jan 3 23:41 CST 2003 > V
- Building a lower chassis brace for 700/900 cars [700]
  posted by john sargent subscriber on Sat Jan 4 07:15 CST 2003 > V

Building a lower chassis brace for 700/900 cars [700]
posted by someone claiming to be philip bradley on Sat Jan 4 01:28 CST 2003 > V
- Building a lower chassis brace for 700/900 cars [700]
  posted by the kick inside on Sat Jan 4 04:14 CST 2003 > V
- Building a lower chassis brace for 700/900 cars [700]
  posted by john sargent subscriber on Sat Jan 4 06:29 CST 2003 > V
  - Building a lower chassis brace for 700/900 cars [700]
    posted by someone claiming to be philip bradley on Sun Jan 5 02:12 CST 2003 > V
    - Building a lower chassis brace for 700/900 cars [700]
      posted by Token Ring Man on Sun Jan 5 03:27 CST 2003 > V
      - Building a lower chassis brace for 700/900 cars [700]
        posted by the kick inside on Sun Jan 5 10:27 CST 2003 > V
    - Building a lower chassis brace for 700/900 cars [700]
      posted by john sargent subscriber on Sun Jan 5 03:57 CST 2003 > V
- Building a lower chassis brace for 700/900 cars [700]
  posted by Token Ring Man on Sat Jan 4 11:59 CST 2003 > V

Building a lower chassis brace for 700/900 cars [700]
posted by Token Ring Man on Sat Jan 4 03:17 CST 2003 > V
- Building a lower chassis brace for 700/900 cars [700]
  posted by Don Foster on Sat Jan 4 04:26 CST 2003 > V
  - Building a lower chassis brace for 700/900 cars [700]
    posted by the kick inside on Sat Jan 4 05:06 CST 2003 > V
    - Building a lower chassis brace for 700/900 cars [700]
      posted by Don Foster on Sat Jan 4 05:55 CST 2003 > V
      - Building a lower chassis brace for 700/900 cars [700]
        posted by Token Ring Man on Sat Jan 4 11:52 CST 2003 > V
        
        Building a lower chassis brace for 700/900 cars [700]
        posted by Don Foster on Sun Jan 5 03:59 CST 2003 > V
  - Building a lower chassis brace for 700/900 cars [700]
    posted by john sargent subscriber on Sat Jan 4 06:20 CST 2003 > V
    - Building a lower chassis brace for 700/900 cars [700]
      posted by Token Ring Man on Sat Jan 4 11:51 CST 2003 > V
- Building a lower chassis brace for 700/900 cars [700]
  posted by john sargent subscriber on Sun Jan 5 13:39 CST 2003 > V

Building a lower chassis brace for 700/900 cars [700]
posted by C on Sat Jan 4 05:18 CST 2003 > V
- Building a lower chassis brace for 700/900 cars [700]
  posted by john sargent subscriber on Sat Jan 4 06:11 CST 2003 > V

Building a lower chassis brace for 700/900 cars [700]
posted by Steve subscriber on Sat Jan 4 07:51 CST 2003 > V
- Building a lower chassis brace for 700/900 cars [700]
  posted by john sargent subscriber on Sun Jan 5 13:42 CST 2003 > V

Building a lower chassis brace for 700/900 cars [700]
posted by Steve subscriber on Sat Jan 4 07:52 CST 2003 > V

Nice job and pics [700]
posted by Erwin on Sat Jan 4 16:53 CST 2003 > V

Building a lower chassis brace for 700/900 cars [700]
posted by CW on Sat Jan 4 17:28 CST 2003 > V

<< < > >>

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.

Volvo RWD/700 Forum Index

Community Forums:

RWD

AWD

GATHERINGS

OPINIONS

PICKNPULL

V8

STORIES

Classifieds

Site Features

RWD Series/Models

AWD Series/Models

Volvo RWD 700 Forum

Building a lower chassis brace for 700/900 cars 700