I have a '93 945 with rear fog lamp only installed. I have purchased some aftermarket fog/driving lamps and am preparing to install them. I found a front fog lamp swith on ebay. It has 4 terminals on the back. I have determined that 2 terminals are for the contacts of the switch and 2 terminals for the integral light. THe switch is for an 83-88 700/900 BTW. OK, here are my questions. I think my car is pre-wired for fog lamps: There are two plugs (one near each headlamp) that are tied off with a tie wrap. Each plug has one black and one white wire. I am assuming the are for fog lamps.

At the dash, the rear fog lamp switch harness has at least 6 wires. Two of which are used for the rear fog lamp function. I am assuming the others are for the front fog lamp control. I know that it would be easier to find a 2 position switch and just plug it in to the harness, but I already have the individual switch. Any tips on which wire is which on the harness??? Thanks,

Matt


--
'82 DL - 153k, '93 945 - 102k