Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2005 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Loose Auto Shift Lever on 940 Turbo 900 1992

posted by  quickbrick4 on  Tue Jan 14 02:42 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

The automatic shift lever on my 1992 940 Turbo sedan is very loose when it is in "D" drive. It moves forward and back way too much. So loose that it looks like it moves all the way into "N" and all the way back to "2". It is nice and tight when in "P" Park though. I've pulled the lower-center console piece off to look for a screw or bolt to tighten up, but found nothing. Is there an adjustment I can make somewhere to tighten up the shift lever?

The car shifts nice and smooth and acts very healthy.

Thanks in advance for any advice and experience passed along!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Loose Auto Shift Lever on 940 Turbo [900][1992]
posted by  quickbrick4  on Tue Jan 14 02:42 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.