Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2008 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Electric Fan Conversion 200 1980

posted by  someone claiming to be Mike on  Fri Jan 17 19:33 CST 2003 [RELATED]

I installed one of two '80s GM fans in my two '80 DLs. One fan does not work (plastic), the other is ok (metal). Is something inferior about plastic GM fans? I changed wires and did every combo I could think and reduced the cause to the fan itself.

The other problem is that I can't shut off the fan, ie the fan is on even when the car is off. What do I do?

Finally, I found that removing the bracket that is in front of the radiator, that holds the horns and arches upward into the hood catch mechanism, gave me enough space to install the electric fan. Is there a problem with having two fans cool the coolant (ie is it possible to have the coolant too cool?). Also, should I put a cover below the fan, as rocks may get kicked up there.

Thanks!





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Electric Fan Conversion [200][1980]
posted by  someone claiming to be Mike  on Fri Jan 17 19:33 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.