Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Help. Which Wires to Test Transfer Pump? 200 1981

posted by  DougC on  Mon Jan 20 09:29 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Aug 10 08:30 CST 2014
[RELATED]

I'm trying to test the transfer fuel pump that's in the tank of my 1981 242. I'm in the trunk with the cover plate off and I'm looking at the top of the tank where the transfer pump wires come out, etc. I have not loosened anything. There are three wires coming off the top of the tank. One brown one goes from the round tank lid/door to ground in the trunk. The other two wires, a black one and a grey one, go together to a plug, then along the side of the car toward the front. I unplugged the plug. I want to apply 12v to the correct two wires to see if the transfer pump is working. Beginners question: Which two wires? I know there's also a sending unit down in there that works. I just want to test the pump and I don't want to hurt anything.
--
Thanks to everyone for the help, Doug C. 81 242 Brick Off Blocks, stock; 86 240, 129K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Help. Which Wires to Test Transfer Pump? [200][1981]
posted by  DougC  on Mon Jan 20 09:29 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.