Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2014 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

1st time brake pad replacement was EASY! Thank you Volvo for the good engineering! 900

posted by  scottfunk on  Thu Jan 30 13:43 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I just replaced the front & rear brake pads on my 93' 960 and I must say, it's the easiest brake pad replacement job I've ever done. I must commend Volvo for the ease in replacing them. It only took 18 minutes per wheel.

I removed a bit of the brake fluid from the reservoir to prevent overflow while depressing the piston into the caliper.

I bought some Dura brand from a local foriegn auto parts store and later found out (after removal of wheel) that they were the wrong type! :( I decided to pay a visit to the Volvo parts department for an OEM and am glad I did. I have the Girling type calipers.

Just thought I'd post this message if anyone was considering taking your 960 to a shop for this job... DON'T!!! If you have an IQ over 60 and can see, then you CAN do it yourself! :)

I'm very happy to have this board as a resource!

Sincerely,

Scott


--
1993 960 Sedan






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1st time brake pad replacement was EASY! Thank you Volvo for the good engineering! [900]
posted by  scottfunk  on Thu Jan 30 13:43 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.