Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2010

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Dilemma in leakproofing big 240 plastic headlights.

posted by  B.C. on  Mon Feb 3 17:28 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Mar 28 22:28 CST 2012
[RELATED]

Got a nice pair from eBay, they were advertised as leaking so I was ready. Prized off the LH lens easily, has black spots on the mirror. Opened the RH one, mirror is perfect.

Decided that a good reseal job would require removal of the old sealant. IS THAT TRUE? The old stuff is in there like it's welded. Is there a solvent? A miniature jackhammer, some other special tool to remove that stuff?

OR, is it OK to just put new sealant in with the old stuff still there?

Also, what about the black spots on the mirror. Is there any way to clear them up? There are like 20 to 30, size of a pinhead. They seem to be holes in the silvering.

Thanks in advance,

Bob

:>)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Dilemma in leakproofing big 240 plastic headlights.
posted by  B.C. subscriber  on Mon Feb 3 17:28 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.