Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Instrument cluster connections 200 1987

posted by  Quter on  Tue Feb 4 11:57 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Broad subject, but I need information on the connections. More specifically the tachometer. There is a 3 prong(male)connector at the top and a 2 prong (male)connector at the bottom. The cable that fits the 3 prong comes from the clock. I can only find 1 wire (orange) that fits either side of the 2 prong.

The wiring diagram in the Haynes 240 series gives the basic picture and leaves a lot to be desired.

Any help would be very helpful.

Jim






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Instrument cluster connections [200][1987]
posted by  Quter  on Tue Feb 4 11:57 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.