Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2011 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

studs and bolts 140-160

posted by  cdu on  Fri Feb 7 21:24 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Sep 20 11:18 CST 2000
[RELATED]


I imagine that studs are used instead of bolts because it would
be impossible to line things up without having the studs in place
ahead of time.

My question is -- my 164 arn manifold has 9 mounting holes that
are through a single piece of metal and 11 that are shared between
2 different pieces of metal (one next to an exhaust port the other
next to an intake port).

Would it make sense to use studs on the 9 complete holes and
bolts on the other 11? I've got enough of those big dished
washers so that isn't a problem.

Are bolts stronger than studs? (assuming that all the materials
are the same -- grade 8 bolts vs grade 8 studs + grade 8 nuts).
chris






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New studs and bolts [140-160]
posted by  cdu  on Fri Feb 7 21:24 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.