Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Brakes don't bleed -- why? 200 1982

posted by  tjl on  Sat Feb 15 17:29 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jun 6 00:22 CST 2013
[RELATED]

On a 1982 245, we attempted to change the brake fluid by bleeding the brakes as described in the Bentley manual for 1983-1993 240s (things appeared to be the same as the non-ABS configuration described therein).

However, after opening the bleeder valve of the left rear brake, no brake fluid comes out when the brake pedal is pressed in, and the brake pedal does not go down any further than normal. The right rear brake is the same way. Removing one of the bleeder things verified that it was not clogged. We did jack up the car and spin the rear wheels to see if the rear brakes work when the pedal is pressed (they do).

Is there anything else that needs to be done to bleed the brakes?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Brakes don't bleed -- why? [200][1982]
posted by  tjl  on Sat Feb 15 17:29 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.