Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

rear main seal replacement 200

posted by  someone claiming to be zakir on  Sat Feb 15 18:53 CST 2003 [RELATED]

I am suspecting that the rear main seal is leaking. read up the archives on doing the job. I was wondering how high do you guys raise your car up? Also do you remove the transmission out from under the car to replace the rear main seal on the engine and the tranny seal --- or can all this be done with the tranny removed and still under the car. I did some measurements, looks like I have to have raise the car about 20 inches to take the tranny out. I am not at all comfortable rasing the car this high up.

Also I do not have a transmission jack adaptor. Any of you did this with a regular floor jack ? If so how did you support the tranny?

Thanks in advance.
zakir
240dl 1990 automatic





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New rear main seal replacement [200]
posted by  someone claiming to be zakir  on Sat Feb 15 18:53 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.