Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2011 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

ignition coil 200 1987

posted by  volvtron on  Mon Mar 3 16:30 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Okay still checkin stuff on the 240 to get it to run. I did the diagnostic test on the ignition coil. Usinng the Hanes manual and an ohmmeter I checked the primary and secondary resistance. The prmary is supposed to be 1.1 - 1.3 and the secondary 9.6 - 11.6K for a computerized system, on both mine did not read at all. I believe the meter to be working correctly. Is this reading even possible? If the coil is bad will it have no reading? The manual just says if the readigs are not as specified the coil is bad. I had no previous signs of the coil going bad, do they just up and die with no warning. I had posted another thread about what I have done so far to fix the car it can be found at this link. http://www.brickboard.com/RWD/index.htm?id=597229
Thanks again for the help.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ignition coil [200][1987]
posted by  volvtron  on Mon Mar 3 16:30 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.