Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Which wires for Power to Radio 200 1990

posted by  Philip on  Mon Mar 10 04:44 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 10:21 CST 2014
[RELATED]

I hooked up a CR 712 with:

Hot from ignition switch, to the green wire that goes to the radio.

Hot all the time, to the wire on car side of connector that is fat and red but blue on radio side of connector.

No connection, to the small black wire on car side of connector and grey on radio side of connector.


Now the radio will work without turning on the ignition switch. I think I burned out a radio in the past from this type of connection.

What should I do now to figure the correct wiring connection? (I am installing this in a 1990 760T so looking to connect by wire color in the car won't work.)

Thanks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Which wires for Power to Radio [200][1990]
posted by  Philip  on Mon Mar 10 04:44 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.