Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2000 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Trim panel water damage - minor 200

Finally I did it. Got the RR door to open on my 1986 244GL. The PO told me that a SlimJim user had messed up something and it had never opened in years.

AND, I I got it open with NO damage to the panel, the paint, or the glass. fixed the problem. Took several hours, much of that in "tool making" with a coat hanger.If you have the same problem, post - it's a long explanation.

BUT - the trim panel has some water damage weakness - mostly on one lower corner. Do you know anything I can do, spray on, reinforce, glue up, etc. that will help the panel stay strong?

Naturally I will be adding coverage to the water shield. BTW, the shield is a big sheet of celluloid, not that rot-away paper stuff I've seen on my earlier model 240s.

Thanks for reading and helping out.

Bob

:>)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Trim panel water damage - minor [200]
posted by  B.C. subscriber  on Thu Mar 13 08:09 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.