Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Tied Up over Tie Rods 200 1980

posted by  someone claiming to be Pia on  Fri Mar 21 15:09 CST 2003 [RELATED]

My 1980 DL with Cam Gear (#2 under the "steering" plate) needs replacement of the right inner tie rod. It is not a turbo and does not have power steering. I thought that the body shop was out of it when they couldn't find the right part. I ordered a right inner tie rod for the Cam Gear and it didn't fit. I needed a female end and a little shorter hole than the part that I received. Could it be a ZF part be needed because the car was hit on the right front many years ago and some body shop may have replaced the steering rack with a ZF? Or are there any other inner tie rods I could use?


Thanks in advance





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Tied Up over Tie Rods [200][1980]
posted by  someone claiming to be Pia  on Fri Mar 21 15:09 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.