Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Cruise Control 900 1994

I'm about ready to pull my hair out trying to fix the cruise. It works mostly when the car is first started, but quits anywhere from 10 seconds to 10 minutes into operation and won't resume after that. The diagnostic codes all check out properly. The car also quits blowing air out of the dash vents with a slight pull on the engine. This leads me to believe I have a vacuum problem. I've checked all the connections I can find- the servo, brake switch and the T connector. They all seem to hold vacuum. I keep seeing info about the vacuum pump. What/where is it? My car is a '94 940 wagon. Is it the unit the T connector plugs into? Or hidden somewhere else?
Thanks for the help.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Cruise Control [900][1994]
posted by  someone claiming to be Mark  on Sun Mar 23 08:55 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.