Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Flame trap relocation 200 1981

posted by  old244 on  Sun Mar 23 16:01 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jan 17 02:44 CST 2008
[RELATED]

I started in on installing a flame trap relocation kit from IPD today. Got the intake manifold off and assorted other junk (throttle body, etc.). First question - in IPD instructions, they say to shorten existing hose from bottom of the fuel distributor. With all the gunk in a k-jet compartment, exactly which hose is this one (description of length, diameter would be beneficial). It looks as though I will be putting a harness in while I'm at it, since the existing one has been patched and taped in numerous areas.

TIA,
Jeff






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Flame trap relocation [200][1981]
posted by  old244  on Sun Mar 23 16:01 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.