Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil Breather Box Test 200

posted by  Mark Lundell on  Mon Mar 24 05:48 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 14 21:34 CST 2014
[RELATED]

I've read about using the blow test on the oil breather box. Why must the blowing hose go directly on the box nipple? Why can't I take off the flameguard fitting and stick a small piece of copper tubing into the hose where the flame guard plugs in? Seems to me that it should be able to test both the breather box and the hose that way. What am I missing?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Oil Breather Box Test [200]
posted by  Mark Lundell  on Mon Mar 24 05:48 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.