Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

replacing balance shaft belt 700 1990

I have a 1990 740 GLE with the infamous 16 valve engine. The previous owner followed the local Volvo dealer's advice and had the balance shaft belt removed at 100,000 miles, without being replaced. The Volvo tech told him that the balance shaft belt takes power away from the engine. Anyway, now I am approaching 150,000 miles and will be replacing the timing belt, tensioner, oil pump pulley bolt, etc... My question is, should I be putting a balance shaft belt back on the engine at this point, after the car has gone over 3 years and 50,000 miles without it? If I should have this belt re-installed, should I replace the tensioner on that belt also? Is there anything else I should look at BEFORE re-installing this belt?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New replacing balance shaft belt [700][1990]
posted by  speculaas  on Tue Mar 25 06:45 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.