Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Engine swap? 200 1983

posted by  Breadman on  Sat Mar 29 06:52 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Apr 18 04:46 CST 2012
[RELATED]

1. My 83 B23F (LH2.0) is "blown". Can I swap out a B230? My dist. is in the front, are the B230's from a 240 in front or at the rear? If I CAN use a B230, which LH system do I use? What about mating the engine to my auto tranny? Has anyone done this swap?
2. If I "rebuild" my B23F, with me doing the assembly,how much $ to get the block boiled, clearances checked, grinding, etc.?
3. If I get a good donor block from a B23F,what is the minimum to do to put my good head on it? (Check clearances,if the head or top of block needs grinding to match up, does it require disassembly?) If so, maybe go all out for a rebuild of mine?See #2
TIA, Mark

--
Breadman '83 244GL 220K






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Engine swap? [200][1983]
posted by  Breadman  on Sat Mar 29 06:52 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.